Defender Security 812BF Dokumentacja Pobierz pdf (Strona 23)

SERVICE INSTRUCTIONS

BATTERY REMOVAL AND MAINTENANCE (ROAD TOW MODELS)

WARNING

Refer to the battery safety section on pages 23-24.

BATTERY MAINTENANCE

1. Undo the two M10 nuts on the battery cover.

2. Remove the battery cover.

3. The battery can be serviced in this position.

BATTERY REMOVAL

1. Remove the negative battery lead.

2. Remove the positive battery lead.

3. Lift out.

When reinstalling the battery apply a small smear of Vaseline to the terminals.

WARNING

Use rubber gloves to keep oil off skin and dispose of the used oil and filter

in an ecologically sound way. The oil and filter should be changed once a

year or at any time it becomes contaminated. Before commencing check that

the chipper is standing level and brush away loose chips.

CHANGE HYDRAULIC OIL AND FILTER (ALL MODELS)

1. Remove the black screw cap from the top of the filter housing.

2. Partially remove filter element from inner cup. Leave filter to

drain for 15 minutes.

3. Remove filter element from cup when clear of hydraulic oil.

4. Remove drain plug and drain oil into a suitable container.

5. Replace drain plug.

6. Refill with VG 32 hydraulic oil until the level is between the

min and max lines marked on the tank (about 18 litres for

road tow models, 40 litres for tracked models).

7. Refit the filter cup, install a new filter element and refit the black

screw cap to the filter housing, ensuring o-ring remains in place.

! !

Model shown 190TFTR

BATTERY MAINTENANCE

1. Remove the seven M6 bolts securing the

tracking controls front guard.

2. The battery can be serviced in this position.

BATTERY REMOVAL

1. Remove the seven M6 bolts securing the

tracking controls front guard.

2. Remove the two M10 bolts securing the

battery clamp.

3. Remove the negative battery lead.

4. Remove the positive battery lead.

When reinstalling the battery apply a small smear of Vaseline to the terminals.

BATTERY REMOVAL AND MAINTENANCE (TRACKED MODELS)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 77 78

Komentarze do niniejszej Instrukcji

Brak uwag

Defender Security 812BF Dokumentacja Strona 23

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Defender Security 812BF